Latest News

Influence of MWCNTs on CS/PVA/GEN hybrid hydrogels

Published Now in Carbohydrate Polymers!

These materials have potential use in regenerative medicine and tissue engineering. This research was developed in collaboration with professor Castell group at Medicine Faculty, UNAM.

New Biaxial Tensile Tester

¡Published now!

This technological development is available for mechanical testing considering both macro an mcromechanical resposnes of soft membranes.

Search

List of Publications

    2021

  1. López-Lugo J. D., Pimentel-Domínguez R., Benítez-Martínez J. A., Hernández-Cordero J., Vélez-Cordero J, R., Sánchez-Arévalo F.M., Photomechanical polymer nanocomposites for drug delivery devices. Molecules. 2021 (23) 5376. https://doi.org/10.3390/molecules 26175376. Factor de Impacto: 4.41
  2. Benítez-Martínez J. A., Garnica-Palafox I. M., Vázquez-Victorio G., Hautefeuille M., and Sánchez-Arévalo F.M. Semi-interpenetrating polymeric networks based on poly(dimethylsiloxane)-chitosan-poly(vinyl alcohol) crosslinked with genipin with possible use in biomedical applications. Journal of Materials Science. 2021. https://doi.org/10.1007/s10853-020-05683-3. Factor de Impacto: 3.442.
  3. Chamorro-Posada P., Dante R. C., Vázquez-Cabo J.,Dante D. G., Martín-Ramos P., Rubinos-López O., Sánchez-Arévalo F. M. Experimental and theoretical investigations on a CVD grown thin film of polymeric carbon nitride and its structure. Diamond and Related Materials, 2021, (111) 108169. https://doi.org/10.1016/j.diamond.2020.108169. Factor de Impacto: 2.650.

    4. 2020

  4. Garnica-Palafox I. M., Estrella-Monroy H. O., Vázquez-Torres N. A., Álvarez-Camacho M., Castell-Rodríguez A. E., Sánchez-Arévalo F.M. Influence of multi-walled carbon nanotubes on the physico-chemical and biological responses of chitosan-based hybrid hydrogels. Carbohydrate Polymers, https://doi.org/10.1016/j.carbpol.2020.115971 2020. Factor de Impacto: 6.044.

    5. 2019

  5. Garnica-Palafox I.M , Álvarez-Camacho M. , and Sánchez-Arévalo F. M. Macro- and micromechanical responses of an elastomeric membrane undergoing biaxial tension by indentation. Journal of Material Science. 2019. DOI:https://doi.org/10.1007/s10853-019-03887-w. Factor de Impacto: 3.442. ISSN: 0022-2461 (Print),  1573-4803 (Online)
  6. Vázquez N., Sánchez-Arévalo F., Maciel-Cerda A., Garnica-Palafox I. M., Ontiveros-Tlachi R., Chaires-Rosas C., Pinon-Zarate G., Herrera-Enríquez M., Hautefeuille M., Vera-Graziano R., Castell-Rodríguez A. Influence of the PLGA/gelatin ratio on the physical, chemical and biological properties of electrospun scaffolds for wound dressings. Biomedical Materials. 2019(14) 045006. https://doi.org/10.1088/1748- 605X/ab1741.Factor de Impacto: 3.440. Online ISSN: 1748-605X. Print ISSN: 1748-6041
  7. Dante R. C., Trakulmututa J., Meejoo-Smith S., Martín-Ramos P., Chamorro-Posada P., Rutto D., Sánchez-Arévalo F. M. Methylene blue-carbon nitride system as a reusable air-sensor. Materials Chemestry and Physics. 2019. Vol (231). 351-356. Factor de Impacto: 2.781. ISSN: 0254-0584
  8. Picho-Chillán G., Dante R C., Muñoz-Bisesti F., Martín-Ramos P., Chamorro-Posada P., Vargas-Jentzsch P.,Sánchez-Arévalo F. M., Sandoval-Pauker C., Rutto D. Photodegradation of Direct Blue 1 azo dye by polymeric carbon nitride irradiated with accelerated electrons. Materials Chemestry and Physics. 2019. Vol (237). 121878. Factor de Impacto: 2.781. ISSN: 0254-0584

    9. 2018

  9. Dante R. C., Martín-Ramos P., Chamorro-Posada P., Meejoo-Smith S., Vázquez-Cabo J., Rubiños-López O., Lartundo-Rojas L., Sánchez-Arévalo F. M., Trakulmututa J., Rutto D., Deebansok S., Srikhaow A. Comparison of the activities of C2N and BCNO towards Congo red degradation. Materials Chemestry and Physics. 2018. Vol (221). 397-408. Factor de Impacto: 2.781. ISSN: 0254-0584.
  10. Cuando-Espitia N, Sánchez-Arévalo F. M., Hernández-Cordero J..Random laser imaging of bovine pericardium under the uniaxial tensile test. Biomedical Optics Express. 2018, 9 (8), 3523-3533. Factor de Impacto: 3.910. ISSN:2156-7085.
  11. Chamorro-Posada P., Martín-Ramos P., Sánchez-Arévalo F. M., Dante R. D. Molecular dynamics simulations of nanosheets of polymeric carbon nitride and comparison with experimental observations. Fullerenes, Nanotubes and Carbon Nanostructures. 2018, 26 (3), 137-144. Factor de Impacto: 1.411. Print ISSN: 1536-383X Online ISSN: 1536-4046.

    12. 2017

  12. Pérez-Zúñiga M. G., Sánchez-Arévalo F.M., Hernández-Cordero J. Enhanced photomechanical response of Ni-Ti shape memory effect alloy coated with polymer-based phothermal composites. Smart Materials and Structures. 2017, 26, 10. Factor de Impacto: 3.543. Online ISSN: 1361-665X, Print ISSN: 0964-1726
  13. Sánchez-Arévalo F.M. Muñoz-Ramírez L.D., Álvarez-Camacho M., Rivera Torres F., Maciel-Cerda A., Montiel-Campos R., Vera-Graziano R. Macro- and micromechanical behaviors of poly(lactic acid)-hydroxyapatite electrospun composite scaffolds. Journal of Materials Science. 2017, 52, 3353-3367. Factor de Impacto: 3.442. ISSN: 0022-2461 (Print),  1573-4803 (Online).
  14. Dante R., Sánchez-Arévalo F. M., Huerta L., Muñoz-Besesti F., Marquez D., Martín-Ramos P., Lartundo-Rojas L., Chamorro-Posada P., Solorza-Feria O. Photocatalytic activity of a new composite material of Fe (III) oxide nanoparticles wrapped by a matrix of polymeric carbon nitride and amorphous carbón. Fullerenes, Nanotubes and Carbon Nanostructures. 2017. Vol. 25 (11).630-636. Factor de Impacto: 1.411. Print ISSN: 1536-383X Online ISSN: 1536-4046.
  15. Navarrete M., Vera-Graziano R., Maciel-Cerda A. Sánchez-Arévalo F. M., Godinez F.A. Elastic evaluation of poly(lactic acid) electrospun membranes using the pulsed photoacoustic technique. International Journal of thermophysics. 2017, 38:121. Factor de Impacto. 0.853. ISSN: 0195-928X (Print)  1572-9567 (Online).
  16. Roberto.C. Dante, Pedro Chamorro-Posada, José Vázquez-Cabo, Óscar Rubiños-López, Francisco.M. Sánchez-Arévalo, Lázaro Huerta, Pablo Martín-Ramos, Luis Lartundo-Rojas, Carlos.F. Ávila-Vega, Edgar.D. Rivera-Tapia, Cristian.A. Fajardo-Pruna, Álvaro.J. Ávila-Vega, Omar Solorza-Feria, Nitrogen-carbon graphite-like semiconductor synthesized from uric acid. Carbon. 2017, vol(121), 368-379. doi: 10.1016/j.carbon.2017.05.098. Factor de Impacto 7.466. ISSN: 0008-6223.

    17. 2016

  17. Garnica-Palafox I.M. Sánchez-Arévalo F.M. Influence of natural and synthetic crosslinking reagents on the structural and mechanical properties of chitosan-based hybrid hydrogels. Carbohydrate Polymers. 2016, 151,. 1073-1081. Factor de Impacto: 6.044. ISSN: 0144-8617.
  18. Dante R. C., Sánchez-Arévalo F.M., Chamorro-Posada P., Vazquez-Cabo J., Lartundo-Rojas L., Santoyo-Salazar J., Mendoza-Cruz R.,Velazquez-Salazar J., Arellano-Jiménez, J., Samaniego E., Solorza-Feria O. Copper complexes within the supramolecular solid structure of cyanuric acid and melamine. Fullerens, Nanotubes and Carbon Nanostructures. 2016, Vol. 24 (11), 688-697. Factor de Impacto 0.8.
  19. Pimentel-Domínguez R., Velázquez-Benítez A. M., Vélez-Cordero J, R., Hautefeuille M., Sánchez-Arévalo F.M., Hernández-Cordero J. Phothermal effects and applications of p olydimethylsiloxane membranes with carbon nanoparticles. Polymers 2016, 8, 84. 2-18. Factor Impacto: 3.68. ISSN 2073-4360.
  20. Alvarez-Camacho M. Alvarez-Guevara V., Duque Gastelum C., Flores Vázquez D., Rodríguez-Reyes G., Sánchez-Arévalo F.M. Use of three-dimensional digital image correlation to evaluate mechanical response of prosthetic systems. Prosthetics and Orthotics International. 2016. DOI: 10.1177/0309364616637956. Factor Impacto: 1.482. ISSN: 03093646.
  21. Chamorro-Posada P., Vázquez-Cabo J., Rubiñoz-López O., Martín-Gil J., Hernández-Navarro S., Martín-Ramos P., Sánchez-Arévalo F. M., Tamashausky A. V., Merino-Sánchez C., Dante R. THz TDS study of several sp2 carbon materials: Graphite, needle coke and graphene oxides. Carbon. 2016, 98. 484-490. Factor de Impacto 7.466. ISSN: 0008-6223.

    22. 2015

  22. Dante R. C., Sánchez-Arévalo F. M., Chamorro-Posada P., Vázquez-Cabo J., Huerta L., Lartundo-Rojas L., Santoyo-Salazar J., Solorza-Feria O., Díaz-Barrios A., Zoltan T., Vargas F., Valenzuela T., Muñoz-Bisesti F., Quiroz-Chávez F. J. Syntesis and characterization of Cu-doped polymeric carbon nitride. Fullerens, Nanotubes and Carbon Nanostructures. 2015. DOI: 10.1080/1536383X.2015.1124864. Factor de Impacto 0.8.
  23. Rivera-Tapia E. D., Fajardo C. A., Ávila-Vega A. J., Ávila C. F., Sánchez-Arévalo F. M., Chango-Villacís I., Quiroz-Chávez F. J., Santoyo-Salazar J. Dante R. C. Synthesis of boron carbon nitride oxide (BCNO) from urea and boric acid. Fullerens, Nanotubes and Carbon Nanostructures. 2015. DOI:10.1080/1536383X.2015.1078794. Factor de Impacto 0.8.
  24. Sánchez-Arévalo F. M., Garnica-Palafox I. M., Jagdale P., Hernández-Cordero J., Rodil S. E., Okonkwo A. O., Robles Hernandez F. C. and Tagliaferro A. Photomechanical response of composites based on PDMS and carbon soot nanoparticles under IR laser irradiation. Optical Materials Express. 2015, 5 (8) 1792-1805. Factor de Impacto 2.844. ISSN: 2159-3930.
  25. García-Castillo F.N., Cortés-Pérez J., Amigó V., Sánchez-Arévalo F.M., Lara-Rodríguez G.A. Development of a stress-induced martensitic transformation criterion for a Cu-Al-Be polycrystalline shape memory alloy undergoing uniaxial tension. Acta Materialia. 2015, 97. 131-145. Factor de Impacto 7.293. ISSN: 1359-6454.
  26. Cuando Espítia N., Sánchez-Arévalo F.M. and Hernández-Cordero J. Mechanical assessment of bovine pericardium using Müeller matrix imaging, enhanced backscattering and digital image correlation analysis. Biomedical Optics Express. 2015, 6 (8). Factor de Impacto: 3.910. ISSN:2156-7085.
  27. Dante R. C., Sánchez-Arévalo F. M., Chamorro-Posada P., Vázquez-Cabo J., Huerta L., Lartundo-Rojas L., Santoyo-Salazar J., Solorza Feria O. Supramolecular intermediates in the synthesis of polymeric carbon nitride from melamine cynurate. Journal of Solid State Chemistry. 2015 (226) 170-178. Factor de impacto 2.291. ISSN: 0022-4596.
  28. Roé-Sosa Adriana, Estrada Mirna R., Calderas Fausto, Sánchez-Arévalo Francisco, Manero Octavio, Orta L. de Velasquez María Teresa. Degradation and biodegradation of polyethylene with pro-oxidant aditives under compost conditions establishing relationships between physicochemical and rheological parameters. J. Appl. Polym. Sci. 2015, DOI: 10.1002/APP.42721. Factor de Impacto 2.188. Print ISSN: 0021-8995

    29. 2014

  29. Chamorro-Posada P., Vázquez-Cabo J., Sánchez-Arévalo F.M., Martín-Ramos P., Martín-Gil J., Navas-García L.M., Dante R. C. 2D to 3D transition of polymeric carbon nitride nanosheets. Journal of Solid State Chemistry. 2014 (19) 232-241. Factor de Impacto 2.2.
  30. Dante R. C., Sánchez-Arévalo F. M., Huerta L., Martín-Ramos P., Martín-Gil J. Hybrid and Composite Fibers base on Sisal Natural Fiber and Calcium Carbonate. Journal of Natural Fibers. 2014 (11), 121-135. Factor de Impacto 0.582.
  31. Sánchez-Arévalo F. M., Tapia-McClung H., Pulos G., Zenit R. Reduction of compaction force in a confined bidisperse granular media. Physical Review E. 2013: 87 (5), 052210. Factor de Impacto 2.255
  32. Garnica-Palafox I. M., Sánchez-Arévalo F.M., Velasquillo C., García-Carvajal Z.Y., García-López J., Ortega-Sánchez C., Ibarra C., Luna-Bárcenas G., Solís-Arrieta L. Mechanical and structural response of a hybrid hydrogel based on Chitosan and Poly(vinyl alcohol) crosslinked with epichlorohydrin for potential use in tissue engineering. Journal of Biomaterials Science: Polymer Edition. 2014 (25) 1: 32-50. Factor de Impacto 1.61

    33. 2013

  33. Briones-Herrera J.C., Cuando-Espitia N., Sánchez-Arévalo F.M., Hernández-Cordero J. Evaluation of mechanical behavior of soft tissue by means of random laser emission. Review of Scientific Instruments. 84, 104301. 2013. Factor de impacto 1.6
  34. Gómez-Pachón E. Y., Sánchez-Arévalo F. M., Sabina J., Maciel Cerda A., Montiel Campos R., Nikola Batina, Morales-Reyes I., Vera-Graziano R. Characterization and modelling of elastic properties of poly(lactid acid) nanofiber scaffolds. Journal of Materials Science. 2013 (48):8308-8319. Factor de Impacto 2.16.
  35. Pimentel-Domínguez R., Sánchez-Arévalo F. M., Hautefeuille M., Hernández-Cordero J. Laser induced deformation in PDMS membranes with embedded carbon nanopowder. Smart Materials and Structures. 2013, 037001. Factor de Impacto 2.089.
  36. Dante, R. C., Martín-Ramos P., Sánchez-Arévalo F. M., Huerta L., M Bizarro., Navas-Gracia L. M., Martín-Gil J. Synthesis of crumpled nanosheets of polymeric carbon from melamine cyanurate. Journal of Solid State Chemistry, 2013; vol. 201. Pp. 153-163. Factor de Impacto 2.2.
  37. Dante R. C. Martín-Ramos P., Navas-Gracia L. M., Sánchez-Arévalo F. M., Martín-Gil J. Polymeric carbon nitride nanosheets. Journal of Macromolecular Science, Part B: Physics, 2013. Vol. 52. Pp. 623-631. Factor de Impacto 0.739.

    38. Before 2013

  38. Sánchez-Arévalo, F. M., Farfán, M., Covarrubias, D., Zenit, R. and Pulos, G. The Micromechanical behavior of lyophilized glutaraldehyde-treated bovine pericardium under uniaxial tension. Journal of the Mechanical Behavior of Biomedical Materials, 2010 Vol. 3. Pp. 640-646. Factor de Impacto 3.048.
  39. Sánchez-Arévalo F. M., Aldama-Reyna W., Lara-Rodriguez A.G., García-Fernández T., Pulos G., Trivi M., Villagran-Muniz M. Use of time history speckle pattern and pulsed photoacoustic techniques to detect the selfaccommodating transformation in a Cu-Al-Ni shape memory alloy. Materials Characterization, 2010. Vol. (61). Pp. 518-524. Factor de Impacto 2.383.
  40. Sánchez-Arévalo F. M., García Fernández T., Pulos G. Villagran- Muniz M. Use of digital speckle pattern correlation to strain measurements in a CuAlBe shape memory alloy. Materials Characterization, 2009. Vol.60. Pp. 775-782. Factor de Impacto 2.383.
  41. Suárez M. A., Juarez-Islas J.A., Lara A., Sánchez-Arévalo F. M. Prediction and characterization of growth temperatures in Al-Zn-Mg alloys. Materials Characterization, 2009. Vol. 60 (5) Pp. 420-426. Factor de Impacto 2.383.
  42. Sánchez-Arévalo F. M. and Pulos G. Use of digital image correlation to determine the mechanical behavior of materials. Materials Characterization, 2008. Vol. 59. Issue 11 Pp. 1572-1579. Factor de Impacto 2.383.
  43. Sánchez F. M., and G. Pulos. Micro and macromechanical experimental study of stress-induced martensitic transformation in a Cu-Al-Be polycrystalline shape memory alloy. Material Science Forum, 2006. Vol. 509. Pp. 87-92 Factor de Impacto 0.498.